Establishment profile
C & F TOOL & DIE CO.
7202 ECKHERT RD., SAN ANTONIO, TX, 78238
332710 — Machine Shops
EIN 742448765
Summary
C & F TOOL & DIE CO. has accumulated 6 OSHA violations across 2 inspections over 11 years of recorded history, with $10,000 in total assessed penalties.
The establishment sits in the 65th percentile for violations within its industry-state peer group of 491 employers. Inspection frequency runs at the 67th percentile. The most recent enforcement activity was recorded 10 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
C & F TOOL & DIE CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $10,000 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0305 B01 II | 1 | 1 | $2,400 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,700 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $1,700 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $1,400 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $1,400 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0242 B | 1 | 1 | $1,400 | Apr 2015 | Apr 2015 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within TX. Peer group: 491 employers. This establishment has 6 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 26 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for C & F TOOL & DIE CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 10 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for C & F TOOL & DIE CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for C & F TOOL & DIE CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for C & F TOOL & DIE CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for C & F TOOL & DIE CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for C & F TOOL & DIE CO.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
C&F TOOL & DIE 7202 ECKHERT RD · SAN ANTONIO, TX, 78238 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for C & F TOOL & DIE CO.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense8500090113!HOOK ASSEMBLY,LOCKIcontract · Last action 2012-11-09$51,300
- Department of Defense4515652571!PLATE,STRUCTURAL,AIcontract · Last action 2010-09-23$19,305
- Department of Defense4515648422!RETAINER ASSY,AXLEcontract · Last action 2010-09-23$12,600
- Department of Defense8501471931!WASHER,KEYcontract · Last action 2014-10-23$0
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2014-10-23. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-08-06 | Planned | 0 | — | $0 | |
| 2015-02-26 | Planned | 6 | 6 | $10,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TX, ordered by federal enforcement volume:
- AUTOMATIC PRODUCTS CORP.GARLAND — 3 federal enforcement records
- CATERPILLAR, INC.SAN ANTONIO — 3 federal enforcement records
- S & S MACHINING & FABRICATION, INCGROESBECK — 2 federal enforcement records
- DOOLING MACHINE PRODUCTS, INC.FREEPORT — 2 federal enforcement records
- TEAM INDUSTRIAL SERVICES, INC.HOUSTON — 2 federal enforcement records
- P&N MACHINE CO., INC.HOUSTON — 2 federal enforcement records
- GREAT SOUTHWEST TOOL CO.EL PASO — 2 federal enforcement records
- QUALITY INDUSTRIAL FABRICATION INC.HOUSTON — 2 federal enforcement records
- ARROW MANUFACTURED PRODUCTSWICHITA FALLS — 2 federal enforcement records
- COMMERCE GRINDINGDALLAS — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in TXState-wide enforcement data
- Machine Shops in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on C & F TOOL & DIE CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is C & F TOOL & DIE CO.'s OSHA violation history?
- C & F TOOL & DIE CO. has 2 OSHA inspections on record with 6 violations and $10,000 in total penalties.
- How does C & F TOOL & DIE CO.'s safety record compare to its industry?
- C & F TOOL & DIE CO. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. C & F TOOL & DIE CO.'s self-reported DART rate is 0 compared to an industry average of 1.5.