Establishment profile
BAXTER MACHINE & TOOL CO INC
103 N HORTON ST, JACKSON, MI, 49202
Operated by Baxter Machine and Tool Co., Inc
332710 — Machine Shops
EIN 382232533
Summary
BAXTER MACHINE & TOOL CO INC has accumulated 37 OSHA violations across 3 inspections over 35 years of recorded history, with $3,950 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 904 employers. Inspection frequency runs at the 65th percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
BAXTER MACHINE & TOOL CO INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within MI. Peer group: 904 employers. This establishment has 37 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for BAXTER MACHINE & TOOL CO INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for BAXTER MACHINE & TOOL CO INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for BAXTER MACHINE & TOOL CO INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for BAXTER MACHINE & TOOL CO INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for BAXTER MACHINE & TOOL CO INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for BAXTER MACHINE & TOOL CO INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for BAXTER MACHINE & TOOL CO INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for BAXTER MACHINE & TOOL CO INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense8510690690!SWITCH,ROTARYcontract · Last action 2024-06-13$104,943
- Department of Defense8507354436!BRACKET,MOUNTINGcontract · Last action 2020-06-17$79,893
- Department of Defense8506912985!SHAFT,SHOULDEREDcontract · Last action 2020-02-11$75,330
- Department of Defense8507396227!BRACKET,MOUNTINGcontract · Last action 2020-06-17$62,079
- Department of DefenseNOUN: COVER, TRANSMISSION; NSN: 2520-01-073-7693; QTY: 14; P/N: 12267837.contract · Last action 2012-09-18$49,068
- Department of DefenseFSC: 1015 685 EACH (WITH A QUANTITY OPTION FOR 115 EACH) LEVER, COCKING, PER DRAWING 11582522, REV PB, FOR THE 105MM M20.contract · Last action 2013-03-05$42,510
- Department of Defense8508231057!BRACKET,MOUNTINGcontract · Last action 2021-06-24$42,229
- Department of Defense8509884878!BRACKET,MOUNTINGcontract · Last action 2023-05-11$20,113
- Department of Defense8508682295!BRACKET,MOUNTINGcontract · Last action 2021-11-16$19,391
- Department of Defense8508755661!BRACKET,MOUNTINGcontract · Last action 2022-01-04$13,945
- Department of Defense4524509846!GEAR CLUSTERcontract · Last action 2014-03-28$13,150
- Department of Defense8510779905!CABLE ASSEMBLY,SPECcontract · Last action 2024-11-06$12,423
- Department of Defense8511030882!CABLE ASSEMBLY,SPECcontract · Last action 2024-12-11$5,112
- Department of Defense8511009731!CABLE ASSEMBLY,SPECcontract · Last action 2025-12-03$0
- Department of Defense8507696101!AXLE,VEHICULAR,NONDcontract · Last action 2020-10-14$0
- Department of Defense4520792736!SHAFT,SHOULDEREDcontract · Last action 2013-08-22$0
- Department of Defense4524878347!GEAR,SPURcontract · Last action 2013-07-12$0
- Department of Defense4524797056!EXTENSION ASSEMBLY,contract · Last action 2013-06-21$0
- Department of DefenseNOUN: DOOR, HATCH, VEHICLE; NSN: 2510-00-065-0765; PART NUMBER: 8756735; QTY: 15; 100% OPTIONcontract · Last action 2012-08-10$0
Federal contract dollars to this establishment. Primary NAICS: 332510 - HARDWARE MANUFACTURING. Last action: 2025-12-03. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-03-24 | Planned | 20 | 11 | $2,450 | |
| 1992-04-27 | Planned | 10 | 3 | $600 | |
| 1990-12-06 | Accident | 7 | 4 | $900 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
BAXTER MACHINE & TOOL CO INC is one of 1 establishments rolled up under the parent organization Baxter Machine and Tool Co., Inc.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Baxter Machine and Tool Co., Inc across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in machine shops within MI, ordered by federal enforcement volume:
- UACJ AUTOMOTIVE WHITEHALL INDUSTRIES, INCLUDINGTON — 3 federal enforcement records
- MOELLER MANUFACTURING COMPANYWIXOM — 3 federal enforcement records
- GRANCO CLARKBELDING — 3 federal enforcement records
- JAMISON INDUSTRIES INCORPORATEDTAYLOR — 2 federal enforcement records
- SKYWAY PRECISION INCLIVONIA — 2 federal enforcement records
- XLT ENGINEERING INCKAWKAWLIN — 2 federal enforcement records
- BOYNE MACHINE COMPANY, INC.JENISON — 2 federal enforcement records
- MULTI PRECISION DETAILAUBURN HILLS — 2 federal enforcement records
- MICRO GAUGE INCBRIGHTON — 2 federal enforcement records
- RESETAR EQUIPMENT INCDEARBORN HEIGHTS — 2 federal enforcement records
Related searches
- All Baxter Machine and Tool Co., Inc locationsParent rollup
- Machine ShopsAll employers in this industry
- Employers in MIState-wide enforcement data
- Machine Shops in MIIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on BAXTER MACHINE & TOOL CO INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Baxter Machine and Tool Co., Inc.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is BAXTER MACHINE & TOOL CO INC's OSHA violation history?
- BAXTER MACHINE & TOOL CO INC has 3 OSHA inspections on record with 37 violations and $3,950 in total penalties.
- How does BAXTER MACHINE & TOOL CO INC's safety record compare to its industry?
- BAXTER MACHINE & TOOL CO INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.