Skip to main content
FastDOL

Establishment profile

AUTOMATED MACHINE & TECHNOLOGY

125 GREENE DRIVE, GRAFTON, VA, 23692
332710 — Machine Shops

Download as PDF →

OSHA inspections
4
over 43 years
Violations
5
Penalties
$0
$0 avg

Summary

AUTOMATED MACHINE & TECHNOLOGY has accumulated 5 OSHA violations across 4 inspections over 43 years of recorded history.

The establishment sits in the 44th percentile for violations within its industry-state peer group of 172 employers. Inspection frequency runs at the 78th percentile. The most recent enforcement activity was recorded 13 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

AUTOMATED MACHINE & TECHNOLOGY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
4
0.1 / yr · last 43 yrs
Violations
5
0.1 / yr
Penalties
$0
Inspection trigger · planned
3 of 4
Inspection trigger · complaint
1 of 4

75% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 5 distinct standards shown · 5 citations in this view.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0178 L0611—Apr 2013Apr 2013
29 CFR 1910.0157 G0111—Oct 2001Oct 2001
29 CFR 1910.0305 B0111—Oct 2001Oct 2001
29 CFR 1910.1200 E0111—Oct 1986Oct 1986
29 CFR 1910.1200 H11—Oct 1986Oct 1986

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

44th

Below average violations in NAICS 3327 within VA. Peer group: 172 employers. This establishment has 5 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
0th
peer median: $600
Inspection frequency
78th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR
2.7
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
13 years ago

No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AUTOMATED MACHINE & TECHNOLOGY. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$1.1M
Awards
51
Top agency
National Aeronautics and Space Administration
$1.1M
Top agencies by obligation (this location)
National Aeronautics and Space Administration$1.1M
Department of Defense$15K
Department of Transportation$13K
Largest awards (top 50 of 51)
  • National Aeronautics and Space Administration
    TRANSONIC DYNAMIC TUNNEL SPARE PARTS
    contract · Last action 2018-06-05
    $190,000
  • National Aeronautics and Space Administration
    TALISMAN GEAR BOX
    contract · Last action 2017-07-12
    $98,245
  • National Aeronautics and Space Administration
    IGF::OT::IGF GENERAL PRECISION MACHININING BALANCE EXTENSION
    contract · Last action 2016-09-12
    $89,645
  • National Aeronautics and Space Administration
    MIXER SECTION PARTS
    contract · Last action 2018-04-23
    $73,810
  • National Aeronautics and Space Administration
    GENERIC NOISE REDUCTION CONCEPTS MOLD
    contract · Last action 2011-03-31
    $60,575
  • National Aeronautics and Space Administration
    LASER PENETRATION SYSTEM
    contract · Last action 2017-08-08
    $55,195
  • National Aeronautics and Space Administration
    MIXER SECTION PARTS
    contract · Last action 2017-07-28
    $46,770
  • National Aeronautics and Space Administration
    IGF::OT::IGF SPRINT RADAZ ADAPTER ASSEMBLIES
    contract · Last action 2014-05-28
    $43,474
  • National Aeronautics and Space Administration
    X-BEAM RAIL MOUNT SUPPORT BLOCK AND SHIM
    contract · Last action 2011-06-15
    $39,380
  • National Aeronautics and Space Administration
    RAKE BEAM, COPPER LEADIN EDGE WITH UNUSED OXYGEN FREE COPPER
    contract · Last action 2015-09-14
    $31,952
  • National Aeronautics and Space Administration
    IGF::OT::IGF TGENERAL AND PRECISION MACHINING TO TEST SIX IN OFFSET STING
    contract · Last action 2017-01-11
    $31,354
  • National Aeronautics and Space Administration
    ASMAT HARDWARE
    contract · Last action 2010-01-29
    $24,421
  • National Aeronautics and Space Administration
    ASMAT 5% NOZZLE
    contract · Last action 2010-01-12
    $18,799
  • National Aeronautics and Space Administration
    GUSSET CAP ANGLES HARDWARE
    contract · Last action 2017-06-20
    $18,695
  • National Aeronautics and Space Administration
    ERECTOR SUPPORT HARWARE
    contract · Last action 2017-07-07
    $18,399
  • National Aeronautics and Space Administration
    GULFSTREAM FLAP TRACK BRACKETS
    contract · Last action 2010-04-12
    $17,040
  • National Aeronautics and Space Administration
    IGF::OT::IGF DEDICATED SYSTEM ADMINISTRATOR
    contract · Last action 2012-11-28
    $15,347
  • National Aeronautics and Space Administration
    SPIRES MOUNT PLATES
    contract · Last action 2017-03-16
    $14,438
  • National Aeronautics and Space Administration
    STRUT INTERFACE
    contract · Last action 2017-06-08
    $12,764
  • National Aeronautics and Space Administration
    IGF::OT::IGF SCALE MODEL RATO ATTACHMENTS
    contract · Last action 2013-01-02
    $12,760
  • Department of Transportation
    FABRICATE DECK SCREENS
    contract · Last action 2011-08-19
    $12,500
  • Department of Defense
    PRESS TOOLS
    contract · Last action 2009-01-29
    $11,428
  • National Aeronautics and Space Administration
    DRILL TEMPLATE TEST
    contract · Last action 2010-07-28
    $10,960
  • National Aeronautics and Space Administration
    IGF::OT::IGF GRAZING FLOW SUPPLY AND INSTALLATION OF HELICOILS AND FASTERNERS
    contract · Last action 2014-04-30
    $10,192
  • National Aeronautics and Space Administration
    FOOT WELL MOLD
    contract · Last action 2017-07-05
    $9,987
  • National Aeronautics and Space Administration
    SWEPT WING SPLITTER PLATE
    contract · Last action 2016-05-31
    $9,895
  • National Aeronautics and Space Administration
    IGF::OT::IGF SYSTEM LOAD TEST FIXTURE - FLIGHT ITEMS WITH MATERIAL CERTS, COUPONS,
    contract · Last action 2015-06-29
    $9,788
  • National Aeronautics and Space Administration
    ASMAT MICROPHONE ASSEMBLIES
    contract · Last action 2010-05-20
    $9,245
  • National Aeronautics and Space Administration
    FINISH MACHINE
    contract · Last action 2010-03-31
    $8,590
  • National Aeronautics and Space Administration
    HTT ZERO DEGREE STING ADAPTER
    contract · Last action 2011-07-11
    $8,516
  • National Aeronautics and Space Administration
    WO 79189 IRVE3 INFLATION SYSTEM 213B11N00343
    contract · Last action 2011-06-01
    $7,860
  • National Aeronautics and Space Administration
    AERO SCIENCES HEMI-SPHERES
    contract · Last action 2017-11-15
    $7,745
  • National Aeronautics and Space Administration
    LEAK LOCATION WAFFLE PANEL
    contract · Last action 2010-08-05
    $7,695
  • National Aeronautics and Space Administration
    CAMIEM MOTOR
    contract · Last action 2017-08-16
    $7,685
  • National Aeronautics and Space Administration
    DRILL TEMPLATE TEST
    contract · Last action 2010-07-28
    $6,155
  • National Aeronautics and Space Administration
    SPECIMENS
    contract · Last action 2010-02-09
    $6,120
  • National Aeronautics and Space Administration
    ATLAS MOUNTING BRACKETS AND CANS
    contract · Last action 2009-12-16
    $5,199
  • National Aeronautics and Space Administration
    BALLEST TAURION
    contract · Last action 2014-10-20
    $4,760
  • National Aeronautics and Space Administration
    C-CHANNEL STRINGER TOOLING FIXTURE ASSEMBLY
    contract · Last action 2014-07-16
    $4,478
  • National Aeronautics and Space Administration
    ALHAT TELESCOPE HOLDER AND PEDESTA
    contract · Last action 2010-02-12
    $3,973
  • Department of Defense
    GARDNER-DENVER HOIST
    contract · Last action 2009-04-14
    $3,947
  • National Aeronautics and Space Administration
    TPS -COPPER PLATE
    contract · Last action 2011-05-17
    $3,720
  • National Aeronautics and Space Administration
    THREADED HUBS AND A MOTOR HUB
    contract · Last action 2018-02-09
    $3,626
  • National Aeronautics and Space Administration
    WO#78209 PATHFINDER SIDE FRAMES
    contract · Last action 2010-01-19
    $3,586
  • National Aeronautics and Space Administration
    GRAPHITE CRUCIBLE BI-CRYSTALS
    contract · Last action 2010-09-14
    $3,450
  • National Aeronautics and Space Administration
    TUBE MOUNTING ADAPTER
    contract · Last action 2014-03-28
    $3,250
  • National Aeronautics and Space Administration
    DEDICATED SYSTEM ADMINISTRATOR
    contract · Last action 2010-02-10
    $3,000
  • National Aeronautics and Space Administration
    IGF::OT::IGF BLANKET PURCHASE AGREEMENT FOR GENERAL AND PRECISION MACHINING. NASA/LANGLEY IS ISSUING THIS SOURCES SOUGHT SYNOPSIS TO DETERMINE THE POTENTIAL OF SMALL BUSINESSES CAPABLE OF MEETING NASA/LANGLEYS REQUIREMENTS (I.E. AEROSPACE HARDWARE FOR EXPLORATION MISSION TO MOON AND MARS SUPPORT) FOR MACHINING AND FABRICATION EFFORTS IN SUPPORT OF OUR RESEARCH AND DEVELOPMENT PROGRAMS. A BRIEF DESCRIPTION OF REQUIREMENTS ARE AS FOLLOWS:FURNISH ALL PERSONNEL, FACILITIES, SERVICES, EQUIPMENT, SUPPLIES, MATERIALS, AND TRANSPORTATION MUST MEET STRICT RESEARCH SCHEDULES WORK TO SPECIFICATIONS SUCH AS (BUT NOT LIMITED TO) GOVERNMENT-FURNISHED DRAWINGS, SKETCHES, OR WRITTEN NARRATIVES THE CONTRACTOR SHALL CONFORM TO VARIOUS NASA AND INDUSTRY STANDARDS/CODES AS SPECIFIED IN TASK ORDERS. SUCH STANDARDS/CODES INCLUDE (BUT NOT LIMITED TO) ALL APPLICABLE INTERNAL/EXTERNAL LANGLEY MANAGEMENT SYSTEM DOCUMENTS. PERFORM ACCURATE MACHINING AND HANDWORK FOR PRECISION TOLERANCES, FITS, AND FINISHES. DIMENSIONAL TOLERANCES WILL VARY WITH HARDWARE AND MAY RANGE FROM GENERAL (+/- .020 INCHES, 125 RMS) TO TIGHT (+/- .0001 INCHES, 4 RMS) CONSTRAINTS DEPENDING ON THE NATURE OF THE WORK MANUFACTURE, REPAIR, REWORK, OR MODIFY RESEARCH AND FACILITY HARDWARE TO INCLUDE, BUT NOT BE LIMITED TO; STRUCTURAL MEMBERS AND ASSEMBLIES MODIFICATION OF AEROSPACE AND AERONAUTICAL MODELS TWO HOUR RESPONSE TIME ON URGENT DELIVERY ORDERS THREE DAY RESPONSE (OR LESS IF REQUIRED) ON REQUESTS FOR QUOTES GENERAL FABRICATION AND PRECISION MACHINING QUALITY MANAGEMENT SYSTEM THE CONTRACTOR SHALL INSPECT ALL COMPLETED TASKS PRIOR TO DELIVERY TO THE GOVERNMENT TO ENSURE COMPLIANCE WITH THE TASK ORDER AND SPECIFIED STANDARD. THE CONTRACTOR SHALL FURNISH A FINAL INSPECTION REPORT WITH COMPLETED TASKS..
    contract · Last action 2020-09-09
    $0
  • National Aeronautics and Space Administration
    GENERAL&PRECISION MACHINING/FABRICATION
    contract · Last action 2011-08-23
    $0
  • Department of Defense
    FABRICATION SUPPORT
    contract · Last action 2010-07-27
    $0

Federal contract dollars to this establishment. Primary NAICS: 332999 - ALL OTHER MISCELLANEOUS FABRICATED METAL PRODUCT MANUFACTURING. Last action: 2020-09-09. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2013-04-03Complaint1—$0
2001-10-12Planned2—$0
1986-07-31Planned2—$0
1982-08-04Planned0—$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in machine shops within VA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on AUTOMATED MACHINE & TECHNOLOGY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is AUTOMATED MACHINE & TECHNOLOGY's OSHA violation history?
AUTOMATED MACHINE & TECHNOLOGY has 4 OSHA inspections on record with 5 violations and $0 in total penalties.
How does AUTOMATED MACHINE & TECHNOLOGY's safety record compare to its industry?
AUTOMATED MACHINE & TECHNOLOGY operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.