Skip to main content

Establishment profile

ANZELC WELDING & FABRICATION, INC.

322 MOEN AVENUE, ROCKDALE, IL, 60436
332312Fabricated Structural Metal Manufacturing

Download as PDF →

OSHA inspections
3
over 35 years
Violations
10
$2,535 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

ANZELC WELDING & FABRICATION, INC. has accumulated 10 OSHA violations across 3 inspections over 35 years of recorded history, with $2,535 in total assessed penalties.

The establishment sits in the 66th percentile for violations within its industry-state peer group of 528 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ANZELC WELDING & FABRICATION, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.1 / yr · last 35 yrs
Violations
10
0.3 / yr
Penalties
$2,535
$254 avg / violation
60% serious40% other
Inspection trigger · complaint
1 of 3
Inspection trigger · planned
1 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $2,535 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II11$960Nov 1990Nov 1990
29 CFR 1910.1000 A0211$525Mar 2008Mar 2008
29 CFR 1910.0178 A0611$525Mar 2008Mar 2008
29 CFR 1910.1200 E0111$525Mar 2008Mar 2008
29 CFR 1910.0132 D0211Mar 2008Mar 2008
29 CFR 1910.1000 E11Mar 2008Mar 2008
29 CFR 1910.0178 P0111Mar 2008Mar 2008
29 CFR 1910.0132 F0411Mar 2008Mar 2008
29 CFR 1910.0134 C02 II11Mar 2008Mar 2008
29 CFR 1910.0178 L04 III11Mar 2008Mar 2008

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

66th

Above average violations in NAICS 3323 within IL. Peer group: 528 employers. This establishment has 10 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
43rd
peer median: $3,526
Inspection frequency
64th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ANZELC WELDING & FABRICATION, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ANZELC WELDING & FABRICATION, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ANZELC WELDING & FABRICATION, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ANZELC WELDING & FABRICATION, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ANZELC WELDING & FABRICATION, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ANZELC WELDING & FABRICATION, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ANZELC WELDING & FABRICATION, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ANZELC WELDING & FABRICATION, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-12-12Complaint96$1,575
1998-01-09Planned0$0
1990-09-25Follow-up1$960

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within IL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ANZELC WELDING & FABRICATION, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ANZELC WELDING & FABRICATION, INC.'s OSHA violation history?
ANZELC WELDING & FABRICATION, INC. has 3 OSHA inspections on record with 10 violations and $2,535 in total penalties.
How does ANZELC WELDING & FABRICATION, INC.'s safety record compare to its industry?
ANZELC WELDING & FABRICATION, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.