Establishment profile
ALRY TOOL & DIE CO., INC.
386 FILLMORE AVE., TONAWANDA, NY, 14150
332111 — Iron and Steel Forging
EIN 160727637
Summary
ALRY TOOL & DIE CO., INC. has accumulated 49 OSHA violations across 8 inspections over 42 years of recorded history, with $17,210 in total assessed penalties.
The establishment sits in the 93rd percentile for violations within its industry-state peer group of 114 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ALRY TOOL & DIE CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
88% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $16,520 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0218 B02 | 2 | 2 | $1,485 | Jun 1989 | Feb 2011 |
| 29 CFR 1910.0305 B01 | 2 | 2 | $885 | Jan 1988 | Feb 2011 |
| 29 CFR 1910.0218 E02 II | 2 | 1 | $490 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0218 A02 I | 2 | 2 | $250 | Feb 1989 | Feb 2011 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Jan 1988 | Feb 2011 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $2,500 | Feb 2024 | Feb 2024 |
| 29 CFR 1904.0039 A02 | 1 | 1 | $1,500 | Aug 2017 | Aug 2017 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,500 | Jan 1992 | Jan 1992 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $1,275 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $1,275 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0217 B06 I | 1 | 1 | $1,275 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0303 F02 | 1 | 1 | $1,200 | Feb 2024 | Feb 2024 |
| 29 CFR 1910.0037 A03 | 1 | 1 | $765 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $650 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0217 C03 | 1 | 1 | $250 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0217 E01 | 1 | 1 | $250 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0218 A03 III | 1 | 1 | $250 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0218 A03 VIII | 1 | 1 | $240 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0218 A02 IV | 1 | 1 | $240 | Feb 1989 | Feb 1989 |
| 29 CFR 1910.0303 F | 1 | 1 | $240 | Feb 1989 | Feb 1989 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3321 within NY. Peer group: 114 employers. This establishment has 49 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 23 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2017
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Feb 15, 2017 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ALRY TOOL & DIE CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ALRY TOOL & DIE CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ALRY TOOL & DIE CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ALRY TOOL & DIE CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ALRY TOOL & DIE CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ALRY TOOL & DIE CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-01-25 | Complaint | 2 | 2 | $3,700 | |
| 2017-08-10 | Referral | 1 | — | $1,500 | |
| 2011-01-13 | Planned | 11 | 11 | $7,280 | |
| 1991-12-04 | Referral | 1 | 1 | $1,500 | |
| 1989-02-15 | Referral | 6 | 1 | $210 | |
| 1989-01-25 | Complaint | 20 | 15 | $2,780 | |
| 1988-01-20 | Planned | 8 | 2 | $240 | |
| 1984-03-15 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in iron and steel forging within NY, ordered by federal enforcement volume:
- AMERICAN AXLE & MANUFACTURINGBUFFALO — 2 federal enforcement records
- AMERICAN AXLE & MANUFACTURINGTONAWANDA — 2 federal enforcement records
- BURKE FORGING & HEAT TREATING, INCROCHESTER — 2 federal enforcement records
- VULCAN STEAM FORGING CO.BUFFALO — 1 federal enforcement record
- FIRTH RIXSON, INC.ROCHESTER — 1 federal enforcement record
- BALL CHAIN MFG CO. INC.MOUNT VERNON — 1 federal enforcement record
- O'BRIEN & GERE, INC. OF NORTH AMERICA DIVISION 676FAYETTEVILLE — 1 federal enforcement record
- ERDLE PERFORATING COMPANYROCHESTER — 1 federal enforcement record
- SPARKZ IRON WORKS CORP.BRONX — 1 federal enforcement record
- MACIEJ ZAKRZEWSKISPENCER — 1 federal enforcement record
Related searches
- Iron and Steel ForgingAll employers in this industry
- Employers in NYState-wide enforcement data
- Iron and Steel in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ALRY TOOL & DIE CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ALRY TOOL & DIE CO., INC.'s OSHA violation history?
- ALRY TOOL & DIE CO., INC. has 8 OSHA inspections on record with 49 violations and $17,210 in total penalties.
- How does ALRY TOOL & DIE CO., INC.'s safety record compare to its industry?
- ALRY TOOL & DIE CO., INC. operates in the iron and steel forging industry. The industry average Total Recordable Incident Rate (TRIR) is 5.4. ALRY TOOL & DIE CO., INC.'s self-reported DART rate is 0 compared to an industry average of 3.3.