Establishment profile
AERO-TECH METAL FINISHING, INC.
7927 MAINLAND DR., SAN ANTONIO, TX, 78250
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
AERO-TECH METAL FINISHING, INC. has accumulated 22 OSHA violations across 7 inspections over 36 years of recorded history, with $27,067 in total assessed penalties.
The establishment sits in the 84th percentile for violations within its industry-state peer group of 216 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AERO-TECH METAL FINISHING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
43% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $27,067 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 E01 | 2 | 2 | $4,228 | Nov 1997 | Apr 2020 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $3,470 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0335 B01 | 1 | 1 | $3,084 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | $3,084 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0029 A02 | 1 | 1 | $3,084 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $3,084 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0303 B07 I | 1 | 1 | $2,313 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0022 B | 1 | 1 | $1,000 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0037 B02 | 1 | 1 | $1,000 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0157 E03 | 1 | 1 | $1,000 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0303 G01 | 1 | 1 | $1,000 | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $180 | Nov 1997 | Nov 1997 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $180 | Nov 1997 | Nov 1997 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $180 | Nov 1997 | Nov 1997 |
| 29 CFR 1910.1200 H | 1 | 1 | $180 | Nov 1997 | Nov 1997 |
| 29 CFR 1910.0178 L06 | 1 | 1 | — | Apr 2020 | Apr 2020 |
| 29 CFR 1910.1200 H03 III | 1 | 1 | — | Apr 2020 | Apr 2020 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Apr 2020 | Apr 2020 |
| 29 CFR 1910.0151 C | 1 | 1 | — | Nov 1997 | Nov 1997 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Nov 1997 | Nov 1997 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within TX. Peer group: 216 employers. This establishment has 22 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AERO-TECH METAL FINISHING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AERO-TECH METAL FINISHING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AERO-TECH METAL FINISHING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AERO-TECH METAL FINISHING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AERO-TECH METAL FINISHING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AERO-TECH METAL FINISHING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AERO-TECH METAL FINISHING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AERO-TECH METAL FINISHING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense4507493324!LINER INScontract · Last action 2008-05-02$34,755
- Department of DefenseCADMIUM PLATINGcontract · Last action 2022-05-24$2,500
Federal contract dollars to this establishment. Primary NAICS: 336411 - AIRCRAFT MANUFACTURING. Last action: 2022-05-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-12-15 | Follow-up | 0 | — | $0 | |
| 2020-12-15 | Follow-up | 0 | — | $0 | |
| 2020-02-04 | Referral | 10 | 6 | $18,649 | |
| 2020-01-27 | Referral | 4 | 4 | $7,518 | |
| 1997-11-06 | Complaint | 8 | 6 | $900 | |
| 1992-02-18 | Planned | 0 | — | $0 | |
| 1990-01-29 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within TX, ordered by federal enforcement volume:
- CONSOLIDATED METAL TECHNOLOGIES INC.ROUND ROCK — 2 federal enforcement records
- EAST TEXAS PLATINGMALAKOFF — 2 federal enforcement records
- ARIZONA TRADERS CO.EL PASO — 2 federal enforcement records
- SCOT INDUSTRIESLONE STAR — 2 federal enforcement records
- THE SOUTHWELL COMPANY INCSAN ANTONIO — 2 federal enforcement records
- CEN-TEX PLATING COMPANY, INC.AUSTIN — 2 federal enforcement records
- GUERRERO PLATING TECHNOLOGY, LLCHOUSTON — 2 federal enforcement records
- A-1 METAL FINISHING & POLISHINGVON ORMY — 1 federal enforcement record
- PRECISE HARD CHROMEWACO — 1 federal enforcement record
- INDUSTRIAL METAL FINISHING CO.HOUSTON — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in TXState-wide enforcement data
- Electroplating, Plating, Polishing, in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AERO-TECH METAL FINISHING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AERO-TECH METAL FINISHING, INC.'s OSHA violation history?
- AERO-TECH METAL FINISHING, INC. has 7 OSHA inspections on record with 22 violations and $27,067 in total penalties.
- How does AERO-TECH METAL FINISHING, INC.'s safety record compare to its industry?
- AERO-TECH METAL FINISHING, INC. operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.