Establishment profile
ADVANCED METAL FINISHING, LLC
2130 MARCH RD., ROSEVILLE, CA, 95747
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
ADVANCED METAL FINISHING, LLC has accumulated 6 OSHA violations across 1 inspection over 8 years of recorded history, with $1,880 in total assessed penalties.
The establishment sits in the 53rd percentile for violations within its industry-state peer group of 351 employers. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED METAL FINISHING, LLC appears in OSHA workplace safety, EPA environmental compliance, FMCSA motor carrier registration, UVA Corporate Prosecution Registry, and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3328 within CA. Peer group: 351 employers. This establishment has 6 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADVANCED METAL FINISHING, LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED METAL FINISHING, LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED METAL FINISHING, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED METAL FINISHING, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED METAL FINISHING, LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED METAL FINISHING, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
First case: 2007-04-11. Most recent: 2007-04-11. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-06-27 | Complaint | 6 | — | $1,880 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within CA, ordered by federal enforcement volume:
- AUTOMATION PLATING CORPORATIONGLENDALE — 2 federal enforcement records
- FINE QUALITY METAL FINISHING, INC.LONG BEACH — 2 federal enforcement records
- ALL METALS PROCESSING OF ORANGE COUNTY, LLCSTANTON — 2 federal enforcement records
- ASSOCIATED PLATING COMPANYSANTA FE SPRINGS — 2 federal enforcement records
- LA HABRA PLATING CO.LA HABRA — 2 federal enforcement records
- HIXSON METAL FINISHINGNEWPORT BEACH — 2 federal enforcement records
- PRECIOUS METALS PLATINGSANTA ANA — 2 federal enforcement records
- ANDRES TECHNICAL PLATING INCPLACENTIA — 2 federal enforcement records
- SERVICE PLATING CO., INC.LOS ANGELES — 2 federal enforcement records
- SAFE PLATING INCCITY OF INDUSTRY — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in CAState-wide enforcement data
- Electroplating, Plating, Polishing, in CAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED METAL FINISHING, LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED METAL FINISHING, LLC's OSHA violation history?
- ADVANCED METAL FINISHING, LLC has 1 OSHA inspection on record with 6 violations and $1,880 in total penalties.
- How does ADVANCED METAL FINISHING, LLC's safety record compare to its industry?
- ADVANCED METAL FINISHING, LLC operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.