Establishment profile
A-1 MACHINING COMPANY, INC.
235 JOHN DOWNEY DRIVE, NEW BRITAIN, CT, 06051
336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
Summary
A-1 MACHINING COMPANY, INC. has accumulated 22 OSHA violations across 5 inspections over 33 years of recorded history, with $5,981 in total assessed penalties.
The establishment sits in the 81st percentile for violations within its industry-state peer group of 104 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
A-1 MACHINING COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $5,981 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,250 | Mar 1993 | Mar 1993 |
| 5A0001 | 1 | 1 | $625 | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | $525 | Jun 1996 | Jun 1996 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $525 | Jun 1996 | Jun 1996 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $525 | Jun 1996 | Jun 1996 |
| 29 CFR 1910.0178 A04 | 1 | 1 | $500 | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0178 L02 III | 1 | 1 | $375 | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0095 G08 IIC | 1 | 1 | $338 | Sep 2000 | Sep 2000 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $318 | Apr 2006 | Apr 2006 |
| 29 CFR 1904.0032 B03 | 1 | 1 | — | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0106 E09 III | 1 | 1 | — | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0178 M05 I | 1 | 1 | — | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | — | Apr 2006 | Apr 2006 |
| 29 CFR 1910.0095 D03 | 1 | 1 | — | Sep 2000 | Sep 2000 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Sep 2000 | Sep 2000 |
| 29 CFR 1910.1025 H02 II | 1 | 1 | — | Jun 1996 | Jun 1996 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Jun 1996 | Jun 1996 |
| 29 CFR 1910.1027 D01 II | 1 | 1 | — | Jun 1996 | Jun 1996 |
| 29 CFR 1910.0095 K02 | 1 | 1 | — | Jun 1996 | Jun 1996 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3364 within CT. Peer group: 104 employers. This establishment has 22 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 58 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for A-1 MACHINING COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Oct 8, 1992 | LATHE,ROTATING PARTS,UNSECURED,WORK RULES,CLEANING,EQUIPMENT FAILURE,STRUCK BY,FLYING OBJECTFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for A-1 MACHINING COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for A-1 MACHINING COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for A-1 MACHINING COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for A-1 MACHINING COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for A-1 MACHINING COMPANY, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for A-1 MACHINING COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-03-28 | Complaint | 9 | 8 | $1,818 | |
| 2000-08-11 | Planned | 0 | — | $0 | |
| 2000-07-21 | Planned | 3 | 1 | $338 | |
| 1996-05-21 | Planned | 9 | 7 | $1,575 | |
| 1992-10-08 | Referral | 1 | 1 | $2,250 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in other aircraft parts and auxiliary equipment manufacturing within CT, ordered by federal enforcement volume:
- PRATT & WHITNEYMIDDLETOWN — 4 federal enforcement records
- UNITED TOOL & DIE COMPANY, INC.WEST HARTFORD — 2 federal enforcement records
- R & D DYNAMICS CORPORATIONBLOOMFIELD — 2 federal enforcement records
- AGC INCORPORATEDMERIDEN — 2 federal enforcement records
- DELL MANUFACTURING COMPANY, INC.FARMINGTON — 2 federal enforcement records
- WHITCRAFT, LLCEASTFORD — 2 federal enforcement records
- MCMELLON BROS., INC.STRATFORD — 1 federal enforcement record
- BRACONE METAL SPINNING, INC.SOUTHINGTON — 1 federal enforcement record
- M & S MACHINE & TOOL CO., INC.WEST HAVEN — 1 federal enforcement record
- W&G MACHINE COMPANYHAMDEN — 1 federal enforcement record
Related searches
- Other Aircraft Parts and Auxiliary Equipment ManufacturingAll employers in this industry
- Employers in CTState-wide enforcement data
- Other Aircraft Parts in CTIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on A-1 MACHINING COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is A-1 MACHINING COMPANY, INC.'s OSHA violation history?
- A-1 MACHINING COMPANY, INC. has 5 OSHA inspections on record with 22 violations and $5,980.5 in total penalties.
- How does A-1 MACHINING COMPANY, INC.'s safety record compare to its industry?
- A-1 MACHINING COMPANY, INC. operates in the other aircraft parts and auxiliary equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.1. A-1 MACHINING COMPANY, INC.'s self-reported DART rate is 1.27 compared to an industry average of 1.3.
- Has A-1 MACHINING COMPANY, INC. had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving A-1 MACHINING COMPANY, INC..